External Dc Power Supply Connection; Antenna Installation - Yaesu FTA-750 Operating Manual

External DC Power Supply Connection

 You may insert the cable plug of the optional SDD-
11/SDD-12 Cigarette Lighter DC/DC Converter into
the EXT DC jack located on the right side of the
transceiver. When making DC connections via the
SDD-11/SDD-12, be absolutely certain to observe
the proper voltage level and polarity guidelines.
 The SDD-11/SDD-12 can be connected to 12
to 24 Volt DC power sources.
Do not connect any accessory unapproved
by YAESU to supply DC power; otherwise
the FTA-750/FTA-550 may be damaged.
FTA-750/FTA-550 O
B
eFore
SDD-11/SDD-12
Cigarette Lighter DC/DC
Converter (12 to 24 Volts)
M
perATing AnuAl
y B
ou egIn

Antenna Installation

 To attach the supplied antenna to the FTA-750/
FTA-550, grasp the base of the antenna firmly, and
exert a moderate "pinching" pressure on the base
as you press the antenna onto the radio's antenna
connector. While exerting this pressure, rotate the
antenna clockwise 1/4 turn to lock the antenna in
place.


FCC ID: K6650013X20
IC: 511B-50013X20
13
YAESU MUSEN CO., LTD.