Table of Contents
Advertisement
String Input:
Direct input of all entries above as string.
NOTE: All characters are allowed. Its in the users responsibility to enter the correct length for all
entries. The above mask would be entered as:
The ETA must be entered separately in the according field.
4.5 Entering Inland AIS Configuration
Select from the Main Menu "5. Transponder Configuration" This option requires the USER password.
The default password from the factory is mentioned on your AIS display at the protection foil. Please
see the appendix in your User Manual for additional password information. Enter User Password and
press [Enter] or [M5].
Installation Manual
o
o
N 1
18' E
0
12' |1>0.01|2>1.30|3>1.80nm
************* Destination***************
use mask [ ]/[*] input string
Destination
:NLDOR02552LEUVE00000
ETA(MMDDhhmm)
:10/31 10:05
----------------------------------------
|
Save
|
N48^12' E 16^26' |1> N/A|2> N/A|3> N/Anm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM|Select->|
|
| Exit
|
|<-Back
42
Y1-03-0212 Rev. E
Advertisement
Table of Contents
