Getting Started; Turning Radio On/Off; Adjusting Volume; Checking Battery Status - Motorola DLR1060 User Manual

GETTING STARTED

For the following explanations, refer to "Parts
Of The Radio" on page 9.

TURNING RADIO ON/OFF

To turn ON the radio, press and hold the Power
button until the radio plays the power up tone
and the standby light begins to blink.
To turn the radio OFF, press and hold the
Power button (~3 seconds) until the radio Tx/
Rx Indicator LED turns OFF and power down
tone is heard.

ADJUSTING VOLUME

Press the (+) button to increase the volume, or
the (-) button to decrease the volume.
To mute, press and hold the (-) button (~2
seconds) until you hear the voice
announcement "Mute".
To maximize volume, press and hold the (+)
button (~2 seconds). The volume will fast scroll
up to maximum volume. You will hear the
volume beeps increment as the volume
increases.
Note: Do not hold the radio too close to the ear
when the volume is high or when adjusting
the volume
There are 16 increments of volume.
As the (+) / (-) buttons are pressed, you will
hear a beep at the current volume level. If
device is receiving during volume
interaction, received audio will be heard at
the new volume instead of beeps.

CHECKING BATTERY STATUS

To check the battery status:
• Press Menu button until the voice announcement
"Battery Level <Level>" is heard, OR
Note: The four levels available for battery status
are : High, Medium, Low and Critical.
To exit battery status checking, press the PTT
button or wait for menu timer to expire. Radio
plays exit menu tone.
27
English