Partition Sliding Door; Electrical Step - Mercedes-Benz Sprinter 2018 Operating Instructions Manual

The % symbol indicates that the rear-end door
is unlocked.
To unlock: slide latch
#
The % symbol is visible.
To open: pull opening lever
#
the rear-end door.
Swing the rear-end door to the side until it
#
engages.
To close: make sure that the rear left door is
#
closed.
Pull the rear right door firmly to by the door
#
handle.
To lock: slide latch
#
The & symbol is visible.

Partition sliding door

Opening and closing the partition sliding door
from the driver's compartment
& WARNING Risk of becoming trapped due
to non-engaged partition sliding door
If the open partition sliding door is not
engaged, it can move on its own while the
vehicle is in motion.
This can cause you or other people to
become trapped.
Before driving, always close the parti‐
#
tion sliding door and ensure that it is
engaged.
To open: turn the key to the left 3.
#
The sliding door is unlocked.
Slide the sliding door to the right
#
it will go.
2 to the left.
1 up and open
2 to the right
2 as far as
Opening and closing
To close: slide the sliding door to the left
#
until it engages.
You can lock the sliding door with the key.
Opening and closing the partition sliding door
from the load compartment
To open: push the lever to the right 3.
#
The sliding door is unlocked.
Slide the sliding door to the left
#
it will go.
To close: slide the sliding door to the right
#
2 until it engages.

Electrical step

Function of the electrical step
Your vehicle's sliding door may be equipped with
an electrical step.
Electrical step 1 automatically extends when
the sliding door opens, and retracts after the slid‐
ing door closes. Electrical step
55
1
1 as far as
1 is equipped