Table of Contents
Advertisement
Installation of air supply
WARNING! Turn off air supply before beginning installation.
Before the first use:
→ Read safety and manual instructions.
→ Close main air valve
→ Install air supply hose and open main air valve
→ Regulate the knob for air pressure level
→ Operate the machine (see page 10).
Before applying air to the machine, make sure that the main air supply valve
hose vertically in the main air supply valve
To open main air supply valve
To close main air supply valve
Install hose to air line
direction of arrow stamped on the unit's body.
CAUTION: When turning the main air supply switch
upper position. Keep hands and clothing clear of moving parts when connecting machine to
air supply.
Blow out the air line to remove scale or other foreign matter before installing the Filter/Regulator.
NOTE: Be sure air line is clean and emptied of water. Air lines tend to condense moisture from the
atmosphere, and precautions must be taken to prevent water from entering the attaching unit.
Before operating the machine, pressurize the air line with the knob
NOTE: Air supply should be regulated by the knob for air pressure level
CAUTION: Maximum air supply should be 80 psi (5,5 bar).
on the machine before connecting air supply.
to ensure appropriate pressure (80 psi/5,5 bar).
. Open the main air supply valve.
push it to the left.
push it to the right.
in a vertical position on filter regulator
on the machine.
so that air flow is in the
on, the machine will move to
and check for leaks.
at 80 psi/5,5 bar.
is closed. Install the
9
Advertisement
Table of Contents
