Unpacking The Machine; Setting Up The Machine - TAGSON PS-2/ES English Manual

Unpacking the machine

1. Check the contents of the PS-2/ES shipping box. It should contain the following:
→ One PS-2/ES machine
→ One reel holder
→ One safety and manual instruction book for PS-2/ES
→ One safety and manual instruction book IndES Avery Dennison fastening system
→ CE compliance sheet
2. Carefully remove the packaging from the machine.
3. Visually inspect the machine and any accessories as well as shipping materials for
damage.
→ If the machine or any other item is damaged, notify the seller.
→ If the shipping box is also damaged, notify the freight carrier as well as Stular plus
company, and keep the shipping materials for the carrier to inspect.

Setting up the machine

Take the machine out of the box and place it on a flat, solid working surface.
Assemble the stand with the reel holder as shown in the picture, and attach with four screws.
Make sure the upper holder is firmly attached with four screws.
Insert Elastic staples in the machine as it is shown in the instruction book IndES Avery Dennison
fastening system, see page 14–17.
NOTE: In order to work with this machine, you need air supply. Air supply should be regulated by a
knob for air pressure level
8
and should not exceed 80 psi (5,5 bar).