Bowflex HVT Service Manual page 93

6. Using a #2 Phillips screwdriver, remove the six indicated (by white
ovals) screws from the Console Assembly.
Note: Be sure to be prepared to support the Console Assembly.
7. Slightly remove the Console Assembly to expose the Console
Cable.
Note: Be sure not to crimp the cable by supporting the Console
Assembly.
8. Disconnect the Console Cable from the Lower Cable and safely
place the Console Assembly out of the work area.
Console Assembly
Console Cable
Lower Cable
9. Using a #2 Phillips screwdriver, remove the four indicated screws
from the Fan Assembly Shroud.
Fan Assembly Shroud
93