8.3.4
Commissioning with vapor
①
②
③
,
④
⑤
⑥
Figure 8-1
Requirement
All valves are closed.
Procedure
Hot vapor
Danger of injury or damage to device.
If the shut-off valves
stabilizing valve
flow of vapor.
• Follow the specified procedure for commissioning.
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
Pressure transmitter
Stabilizing valve
Differential pressure valves
Differential pressure lines
Shut-off valves
Measuring steam
WARNING
⑥
and the differential pressure valve
②
is then opened, the pressure transmitter
8.3 Differential pressure and flow rate
⑦
Drain valves
⑧
Condensate pots
⑨
Differential pressure transducer/Orifice
plate
⑩
Insulation
③
are both open and the
①
can be damaged by the
Commissioning
183