Rotating The Measuring Cell Over The Enclosure - Siemens Sitrans P500 Operating Instructions Manual

4.8

Rotating the measuring cell over the enclosure

You can rotate the pressure transmitter housing by approximately 370° relative to the the
measuring cell.
Rotating the transmitter, for example, when it is installed at an angle, facilitates its operation.
This keeps the keys and the power supply connection in a position where they can still be
operated.
①
②
③
Figure 4-3
Twisting procedure
NOTICE
Device damage
Avoid damaging the device by not twisting the pressure transmitter past the end stops.
1. Loosen both retaining screws
2. Twist the pressure transmitter housing
3. Tighten both retaining screws
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
Measuring cell
Retaining screw (both sides)
Pressure transmitter housing
Range of rotation with pressure transmitters for differential pressure
4.8 Rotating the measuring cell over the enclosure
②
(hexagon socket-head screw 2.5 mm).
③
against the measuring cell
②
(torque: 3.4 to 3.6 Nm).
Install
①
.
51