Descriptions Of Components - Draytek Vigor 2710e Quick Start Manual

Descriptions of Components

2710e
LED
ACT
DSL
LAN 1 - 4
CSM
(for 2710e)
WLAN
(for 2710ne)
WPS
(for 2710ne)
WPS Button
(for 2710ne)
Status Explanation
Off The system is not ready or is failed.
Blinking The system is ready and can work normally.
On DSL connection synchronized.
Blinking DSL connection is synchronizing.
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
On The profile(s) of URL/Web Content Filter
application can be enabled from Firewall >>URL
Content Filter.
On Wireless access point is ready.
Off Wireless access point is not ready.
Blinking It will blink while wireless traffic goes through.
On The WPS is on.
Off The WPS is off.
Blinking Waiting for wireless client sending requests for
connection about two minutes.
On Press this button for 2 seconds to wait for client
device making network connection through WPS.
When the LED lights up, the WPS will be on.
Off The WPS is off.
Blinking Waiting for wireless client sending requests for
connection about 2 minutes.
Interface Description
Connecter for accessing the Internet through ADSL
DSL
2710ne