Installation..............................17 Starting up..............................21 Connections and controls........................23 Operating..............................27 7.1 Starting the device........................... 27 7.2 Main menu............................27 7.3 Menu overview..........................31 7.4 Functions in 3-channel DMX mode................... 32 Technical specifications........................33 LED Theater Spot 250 3200K LED spotlight...
Page 4
Table of contents Plug and connection assignment....................35 Troubleshooting............................37 Cleaning............................... 39 Protecting the environment......................40 LED Theater Spot 250 3200K LED spotlight...
If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change. LED Theater Spot 250 3200K LED spotlight...
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. LED Theater Spot 250 3200K LED spotlight...
The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . LED Theater Spot 250 3200K LED spotlight...
ð Automatic operation is started. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. LED Theater Spot 250 3200K LED spotlight...
Page 9
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – suspended load. LED Theater Spot 250 3200K LED spotlight...
Page 10
General notes Warning signs Type of danger Warning – danger zone. LED Theater Spot 250 3200K LED spotlight...
Extend the life of the device by regular breaks in operation and avoid switching it on and off frequently. This device is not suitable for continuous use. LED Theater Spot 250 3200K LED spotlight...
Page 12
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. LED Theater Spot 250 3200K LED spotlight...
Page 13
Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. LED Theater Spot 250 3200K LED spotlight...
Page 14
NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. LED Theater Spot 250 3200K LED spotlight...
Page 15
Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. LED Theater Spot 250 3200K LED spotlight...
Operation in stand-alone or DMX mode (3 channels) Operating via buttons and display on the unit Very quiet temperature-controlled fan for quiet operation Ideally suitable for use in theatres Bracket, mains cable and barn door included LED Theater Spot 250 3200K LED spotlight...
Secure the barn door with a safety cable on the spotlight after installation. The safety cable must run outside the barn door and must not interfere with the light emission. LED Theater Spot 250 3200K LED spotlight...
Page 18
When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. LED Theater Spot 250 3200K LED spotlight...
Page 19
Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be attached to the bracket. LED Theater Spot 250 3200K LED spotlight...
Page 20
Installation Please note that this device must not be connected to a dimmer. LED Theater Spot 250 3200K LED spotlight...
Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. LED Theater Spot 250 3200K LED spotlight...
Page 22
Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). LED Theater Spot 250 3200K LED spotlight...
Connections and controls Connections and controls LED Theater Spot 250 3200K LED spotlight...
Page 24
Power Twist connector for the voltage supply of a further device 9 Fuse holder. Should the fuse have blown, disconnect the unit from the power supply and replace the fuse with a new fuse of the same type. LED Theater Spot 250 3200K LED spotlight...
Page 25
10 [POWER IN] Power Twist connector for the power supply of the device 11 [DMX OUT] DMX output 3-pin 12 [DMX IN] DMX input 3-pin 13 [DIMMER] Rotary control to set the light intensity LED Theater Spot 250 3200K LED spotlight...
Page 26
14 Display 15 [MENU] Calls up the main menu or a submenu. 16 [UP] Increases the displayed value by one. 17 [DOWN] Decreases the displayed value by one. 18 [ENTER] Confirms a selected value. LED Theater Spot 250 3200K LED spotlight...
Use [MENU], to open the main menu or to return to the main menu. Use [UP] or [DOWN] to select the desired parameter or value. Confirm the desired parameter or value with [ENTER]. ð The selected submenu opens up or the selected value is being accepted. LED Theater Spot 250 3200K LED spotlight...
Page 28
Use[UP] or [DOWN] to select the desired start address from 1 to 512. Confirm your selection with [ENTER]. ð The selected start address is accepted. Make sure that this number matches the configuration of your DMX controller. LED Theater Spot 250 3200K LED spotlight...
Page 29
Dimmer curve with a flat course at the beginning and a steep course at the end ‘Curve 2’ Dimmer curve with linear (proportional) course ‘Curve 3’ Dimmer curve with a steep course at the beginning and a flat course at the end LED Theater Spot 250 3200K LED spotlight...
Page 30
Use [UP] or [DOWN] to select ‘OK’ to reset the values to factory defaults. Use [UP] or [DOWN] to select ‘Cancel’ to leave the set values unchanged. Confirm your selection with [ENTER]. ð The selected setting is accepted. LED Theater Spot 250 3200K LED spotlight...
250 W Protection class IP20 Dimensions (W × H × D) 310 mm × 450 mm × 435 mm Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Weight 10.2 kg LED Theater Spot 250 3200K LED spotlight...
Page 34
Technical specifications Environmental conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing LED Theater Spot 250 3200K LED spotlight...
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) LED Theater Spot 250 3200K LED spotlight...
Page 36
Assignment Ground (shielding) Signal inverted (DMX–, ‘cold’) Signal (DMX+, ‘hot’) unused / second connection (DMX–) unused / second connection (DMX+) LED Theater Spot 250 3200K LED spotlight...
Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: LED Theater Spot 250 3200K LED spotlight...
Page 38
DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. LED Theater Spot 250 3200K LED spotlight...
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. LED Theater Spot 250 3200K LED spotlight...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. LED Theater Spot 250 3200K LED spotlight...
Page 41
Notes LED Theater Spot 250 3200K LED spotlight...
Page 42
Notes LED Theater Spot 250 3200K LED spotlight...