Table of Contents
Advertisement
•
crystalline silica from bricks and cement
and other masonry products, and
•
arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Protect yourself and those around you. Research
and understand the materials you are cutting.
Follow correct safety procedures and comply with
all applicable national, state or provisional health
and safety regulations relating to them, including,
if appropriate arranging for the safe disposal of the
materials by a qualified person.
•
Warning: Hydraulic fluid under pressure could
cause skin injection injury. If you are injured
by hydraulic fluid, get medical attention
immediately.
•
Keep all body parts away from the working tool.
•
When handling material or the tool bit, wear your
Personal Protection Equipment (PPE).
•
Be observant of the hydraulic hoses lying about the
work area as they can be a tripping hazard.
•
Always de-energize the hydraulic system when
changing a tool bit.
•
Take caution when changing a tool bit. Tool bits can
get very hot.
•
Never use the tool in an explosive atmosphere.
Sparks from the breaking process could ignite
explosive gas.
•
Use proper lifting techniques when handling the tool.
Get help from a co-worker and do not over-reach.
•
Ensure work piece is securely fixed. Be aware that
failure of the work piece or accessories may gener-
ate high velocity projectiles.
•
Use proper protection from falling or flying debris,
and keep bystanders at a safe distance.
•
Do not exceed the rated flow and pressure. See
"SPECIFICATIONS" on page 16 for correct flow
rate and pressure rating. Rapid failure of the internal
seals may result.
6 ► BR50 User Manual
SAFETY PRECAUTIONS
Advertisement
Table of Contents
