Leds For Lan Connectors - NEC Express5800 Series User Manual

Chapter 1 General Description
4.7.7

LEDs for LAN connectors

The LAN connectors on rear panel have LINK/ACT LED and SPEED LED.
LINK/ACT LED
Management LAN Connector
SPEED LED
LINK/ACT LED
LAN 1 Connector
SPEED LED
LINK/ACT LED
LAN 2 Connector
SPEED LED

LINK/ACT LED (
This LED indicates the state of the LAN port.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off

SPEED LED (
This LED indicates which network interface is used.
―The standard LAN ports (
―The management LAN port (
SPEED LED pattern
On (amber)
On (green)
Off
36
1, 2, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
1, 2, M)
1 and 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
M) supports 1000BASE-T, 100BASE-TX, and 10BASE-T.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/T120g User's Guide
4. Names and Functions of Parts
Description
Description