Link/Act Led ( 1, 2, M); Optical Disk Drive Access Led; Power Capping Led - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 1 General Description
4.7.3
LINK/ACT LED (
LINK/ACT LED on front panel indicates the status of LAN port.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
4.7.4
Optical Disk Drive Access LED
The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
4.7.5
Power Capping LED
Power Capping LED indicates enabled/disabled status of PowerCapping feature as shown below.
Power Capping LED pattern
On (green)
Flashing (green)
Off
34
1,
2,
M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
Power Capping feature is enabled.
Power Capping is enabled and power control (capping) is working.
Power Capping feature is disabled.
Note
The Power Capping LED seems to be lit or flashing amber when STATUS LED is lit or
flashing amber. The amber STATUS LED indicates a hardware failure. Contact your sales
representative.
Express5800/T120g User's Guide
4. Names and Functions of Parts
Description
Description
Advertisement
Table of Contents
