Leds For Lan Connectors - NEC EXP710 User Manual

Chapter 1 General Description

LEDs for LAN connectors

4.6.5
Three LAN connectors on the rear of the server have LINK/ACT LED and SPEED LED.
LINK/ACT
SPEED
• LINK/ACT LED (
This LED indicates the status of the LAN port.
LINK/ACT LED pattern
On (green)
Blinking (green)
Off
• SPEED LED (
This LED indicates which network interface is used.
− LAN ports support 10GBASE-T, 1000BASE-T, 100BASE-TX, and 10BASE-T.
* Management LAN port supports 1000BASE-T, 100BASE-TX, and 10BASE-T.
M、
SPEED LED pattern
On (amber)
On (green)
Off
1、
SPEED LED pattern
On (green)
On (amber)
Off
M, CMC, 1,
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
M, CMC, 1,
CMC
The port is operating with 10GBASE-T interface.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX or 10BASE-T interface.
2
The port is operating with 10GBASE-T interface.
The port is operating with 5G/2.5G/1GBASE-T interface.
The port is operating with 100BASE-TX or 10BASE-T interface.
Express5800/D120h User's Guide
SPEED
LINK/ACT
2)
Description
2)
Description
Description
4. Names and Functions of Parts
33