Installation - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.13.1 Installation
Install an optical disk drive in the following procedure.
1. See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove the blank cover from Expansion Bay 1.
If the bay contains any 5.25-inch device, remove the device before installing an optical disk drive.
3. Move the lever on right side of optical disk drive bay to the direction shown by (1) in the figure and then
pull it forward shown by (2) to remove the bracket from the chassis.
4. Mount the bracket to the optical disk drive so that the projection of bracket aligns with holes on side of
the drive.
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
95
Advertisement
Table of Contents
