Download Print this page
BEA Falcon Installation Manual

BEA Falcon Installation Manual

Motion sensors for industrial doors and gates

Advertisement

Quick Links

DESCRIPTION
1
2
3

TECHNICAL SPECIFICATIONS

Technology:
Transmitter frequency:
Transmitter radiated power:
Transmitter power density:
Detection mode:
Detection zone:
Min. detection speed:
Supply voltage:
Mains frequency:
Max power consumption:
Output:
Max. contact voltage:
Max. contact current:
Max. switching power:
LED-signal:
Mounting height:
Degree of protection:
Temperature range:
Dimensions:
Tilt angles:
Materials:
Weight:
Cable length:
Norm conformity:
Specifications are subject to changes without prior notice.
* Other use of the device is outside the permitted purpose and can not be guaranteed by the manufacturer.
** Measured in optimal conditions
75.5835.04 FALCON FAMILY 20160301
For more information, please visit www.devancocanada.com
or call toll free at 855-931-3334
FALCON
FALCON: for normal to high mounting (11.5 - 23 ft)
FALCON XL: for low mounting (6.5 - 11.5 ft)
FALCON WIDE: for wide detection field
microwave doppler radar
24.150 GHz
< 20 dBm EIRP
< 5 mW/cm²
motion
FALCON: 13 x 16 ft @ 16ft ; FALCON XL: 13 x 6.5 ft @ 8.2ft;
FALCON WIDE: 30 x 11 ft @ 21 ft. (typical at 30° and field size 9)
2 in/s**
12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
50 to 60 Hz
< 2 W
relay (free of potential change-over contact)
42V AC/DC
1A (resistive)
30W (DC) / 60VA (AC)
red: detection state, parameter indication; green: value indication
FALCON: 11.5 - 23 ft; FALCON XL: 6.5 - 11.5 ft; FALCON WIDE: 11.5 - 21 ft
IP65
from -22 °F to + 140 °F
5 in (L) x 4 in (H) x 3.75 in (W)
0° to 180° vertical
ABS and polycarbonate
14 oz
33 ft
R&TTE 1999/5/EC; EMC 2004/108/EC
1.
push buttons
2.
front face
3.
radar antenna
4.
angle indication
5.
bracket
6.
cable
5
6
Page 1 of 4
4

Advertisement

loading

Summary of Contents for BEA Falcon

  • Page 1: Technical Specifications

    30W (DC) / 60VA (AC) LED-signal: red: detection state, parameter indication; green: value indication Mounting height: FALCON: 11.5 - 23 ft; FALCON XL: 6.5 - 11.5 ft; FALCON WIDE: 11.5 - 21 ft Degree of protection: IP65 Temperature range: from -22 °F to + 140 °F Dimensions: 5 in (L) x 4 in (H) x 3.75 in (W)
  • Page 2 30° (recommended in case of vibrations, rain etc.) The object size and nature 45° can influence the detection. +45° * The vehicle detection filter increases the response time of the sensor. Page 2 of 4 75.5835.04 FALCON FAMILY 20160301...
  • Page 3 TO CHANGE THE VALUE OF 4 DETECTION MODE THE CHOSEN PARAMETER, press the left push button. 5 DETECTION FILTER TO RESET TO FACTORY VALUES, press and hold both push buttons until both LEDs flash. 75.5835.04 FALCON FAMILY 20160301 Page 3 of 4...
  • Page 4: Access Code

    Only trained and qualified personnel may install and setup the sensor. The warranty is void if unauthorized repairs are made or attempted by unauthorized personnel. BEA hereby declares that the FALCON is in conformity with the basic requirements and the other relevant provisions of the directives 1999/5/EC and 2004/108/EC.

This manual is also suitable for:

Falcon xlFalcon wide