Placing/Answering Calls - Sharp AQUOS zero User Manual

52

Placing/Answering Calls

How to dial directly to make a call and answer a call, as well
as options when a call is arriving/during a call are described.
Support for VoLTE/VoLTE (HD+) and
HD Voice
Handset supports VoLTE/VoLTE (HD+) and HD Voice for
high-quality call sound. See "Using VoLTE/VoLTE
and "HD Voice" for details.
Placing Calls
In Home Screen, (Phone)
Phone opens.
Dialpad window opens.
Use onscreen dialpad to enter number
・Include area code for landline numbers.
・ To correct number, Tap
correct number.
(HD+)"
to delete digit(s), then enter
Handset dials number. Call begins when other party
answers.
To end call,
Call ends.
Emergency Calls
Emergency Location Report
Making emergency calls (110, 119 or 118) automatically
reports handset location to corresponding agency (police,
etc.). This system is referred to as Emergency Location
Report, and notifies location based on positioning from
base stations.
・Location Report does not incur registration/transmission
fees.
・Location/signal conditions affect positioning accuracy.
Always provide location and call purpose.
・Hiding Caller ID (using 184, etc.) cancels Location Report.
However, corresponding agency may obtain location
information in life threatening situations.
・Location Report is not sent for calls made while outside
Japan.
After Making an Emergency Call with Reject
Call Enabled
Reject call is disabled for about two hours to receive calls
from corresponding agency. To manually enable Reject call
again after making an emergency call:
In Home Screen, (Phone)
blocking RESTORE PREVIOUS SETTINGS TO BLOCK
CALLS. YES
Settings Call