Siemens SIMATIC ET 200SP Manual page 28

Technical specifications
6.1 Technical specifications
Article number
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
Diagnostic alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Short-circuit to M
•
Short-circuit to L+
•
Diagnostics indication LED
Monitoring of the supply voltage (PWR-
•
LED)
Channel status display
•
for channel diagnostics
•
for module diagnostics
•
Potential separation
Potential separation channels
between the channels
•
between the channels and backplane bus
•
Isolation
Isolation tested with
Standards, approvals, certificates
Suitable for safety-oriented group deactivation
Ambient conditions
Ambient temperature during operation
horizontal installation, min.
•
horizontal installation, max.
•
vertical installation, min.
•
vertical installation, max.
•
Altitude during operation based on sea level
Ambient air temperature-barometric pres-
•
sure-altitude
28
6ES7132-6BH01-0BA0
Yes
Yes
Yes
Yes
Yes; Module-wise
Yes; Module-wise
Yes; Module-wise
Yes; green PWR LED
Yes; Green LED
No
Yes; green/red DIAG LED
No
Yes
707 V DC (type test)
Yes
0 °C
60 °C
0 °C; in all other mounting positions
50 °C; in all other mounting positions
On request: Ambient temperatures lower than 0
°C (without condensation) and/or installation
altitudes greater than 2 000 m
Digital output module DQ 16x24VDC/0.5A ST (6ES7132-6BH01-0BA0)
Manual, 09/2017, A5E03574420-AE