Siemens SIMATIC ET 200SP Manual page 27

Article number
Output current
for signal "1" rated value
•
for signal "0" residual current, max.
•
Output delay with resistive load
"0" to "1", typ.
•
"1" to "0", typ.
•
Parallel switching of two outputs
for uprating
•
for redundant control of a load
•
Switching frequency
with resistive load, max.
•
with inductive load, max.
•
on lamp load, max.
•
Total current of the outputs
Current per channel, max.
•
Current per module, max.
•
Total current of the outputs (per module)
horizontal installation
– up to 30 °C, max.
– up to 40 °C, max.
– up to 50 °C, max.
– up to 60 °C, max.
vertical installation
– up to 30 °C, max.
– up to 40 °C, max.
– up to 50 °C, max.
Cable length
shielded, max.
•
unshielded, max.
•
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
Digital output module DQ 16x24VDC/0.5A ST (6ES7132-6BH01-0BA0)
Manual, 09/2017, A5E03574420-AE
6ES7132-6BH01-0BA0
0.5 A
0.1 mA
50 µs
100 µs
No
Yes
100 Hz
2 Hz
10 Hz
0.5 A
8 A
8 A
8 A
6 A
4 A
8 A; in all other mounting positions
6 A; in all other mounting positions
4 A; in all other mounting positions
1 000 m
600 m
No
Technical specifications
6.1 Technical specifications
27