Table of Contents
Advertisement
Back of Modem
Power
Before You Start
Before you start to use your Modem you must have the following:
1. An active ADSL account and line with a user name and password.
2. IP address, DNS, and gateway settings from your ISP only if applicable.
3. At least one computer with either USB or Ethernet connection.
4. TCP/IP networking protocol installed on the computer (most computers have
this installed by default).
5. Microsoft® Internet Explorer 5.0 or Netscape® 4.5 or greater installed.
6. It may be necessary to disable any firewall or anti-virus software during
installation. It may prevent successful installation. This can be reactivated on
successful installation.
TIP: After plugging in the power cord, the Modem initialises and starts working
after 20 seconds.
TIP: If you push the Reset button, all the parameter settings will revert back to
factory default.
KNOWING YOUR MODEM
Ethernet
4
Reset
RJ11
USB
Advertisement
Table of Contents
