ViewSonic LS625X User Manual page 58

Function
Language
Projector Position
Menu Settings
High Altitude Mode
Quick Auto Search
Security Settings
Panel Key Lock
Remote control code
RS232 Baud Rate
12V Trigger
Current System Status
Sets the language for the On-Screen Display (OSD)
menus. See "Using the menus"
See "Choosing a location"
Menu Display Time
Sets the length of time the OSD will remain active after
your last key press. The range is from 5 to 30 seconds
in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
A mode for operation in high altitude areas. See
"Operations at high altitudes"
See "Switching input signal"
See "Using the password function"
See "Locking control keys"
See "Remote control code"
See "RS232 command table"
A 12V trigger is provided, which can work according
to the demands of your installation environment. Two
options are available:
Off
If you choose this option, the projector does not send
an electronic signal when started.
On
The projector will send electronic signals from the
bottom up when started, and send electronic signals
from the top down when shut down.
Source
Shows the current signal source.
Color mode
Shows the selected mode in the Image menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows the input system format.
IP Address
Displays the IP address of the projector.
MAC Address
Displays the MAC address of the projector.
Firmware Version
Shows the current firmware version.
3X Fast Input
51
Description
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.