Table of Contents
Advertisement
3.
You can adjust AMX and SNMP settings on this page. On the AMX device discovery,
the controller connected to the AMX of the same network will find out the projector
when ON is selected. For details of the AMX Device Discovery, please access the
AMX website: http://www.amx.com/.
4.
If the projector is connected to the network which supports the SMTP (Simple Mail
Transfer Protocol), you can configure it to send alarms via emails when important
events occur.
5.
Crestron (e-Control) page display Crestron e-Control user interface. For details,
please refer to
"About Crestron
e-Control®".
39
Advertisement
Table of Contents
