Table of Contents
Advertisement
About Crestron e-Control
1.
The Crestron e-Control
or adjust the projected image.
You can press
/ to display
more buttons.
i.
The functions of those buttons are identical with those on the OSD menu or
remote control.
ii. To switch the input signal source, please click the required signal.
Menu button can be used to return to the previous OSD menu, exit and save menu settings.
The signal source list may differ from the available interfaces on the projector.
The web browser needs some time to perform change synchronization to the projector when the
projector control panel or remote control is used to change the OSD menu settings.
2.
The Tools page can be used to manage the projector, configure the LAN control
settings, and perform remote network operation security access to the projector.
i.
This part can be used only in the case that the Crestron control system is used.
Please contact Creston or refer to its user guide to get a knowledge of the
installation information.
ii. You can name the projector, and record its position and responsible person.
®
page provides various virtual buttons to control the projector
®
i
ii
i
41
ii
iv
iii
v
vi
i
i
Advertisement
Table of Contents
