Table of Contents
Advertisement
Properties
The module has the following technical properties:
● 16 digital outputs; electrically isolated in groups of 1
● Rated output voltage 24 V DC (24 V DC to 125 V DC / 24 V UC to 48 V UC)
● Rated output current 0.5 A per channel
● Assignable substitute values (per channel)
● Suitable for solenoid valves, DC contactors, and indicator lights
The module supports the following functions:
Table 2- 1
Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output (MSO)
Configurable submodules / submodules for
Shared Device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front cover
Other components
The following component must be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find additional information on accessories in the system manual S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792).
Digital output module DQ 16x24...48VUC/125VDC/0.5A ST (6ES7522-5EH00-0AB0)
Manual, 11/2015, A5E35683139-AA
Firmware version
of the module
(TIA Portal) as of V13,
SP1 with HSP 0142
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
Configuration software
STEP 7
GSD file in STEP 7
(TIA Portal) V12 or higher,
or STEP 7 V5.5 SP3 or
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
Product overview
2.1 Properties
higher
--- / X
X
X
X
X
11
Advertisement
Table of Contents
