Functional Description; Commissioning; Belt Clip; Changing The Battery Pack Fig. 2 - Festool T 18+3 Li Instruction Manual

Cordless drill
Max. torque
Adjustable torque**
Chuck clamping range
Drill diameter max.
Tool holder in drill spindle
Weight without battery pack with Centrotec
* Speed specifications with fully charged battery pack.
** The maximum speed is reduced in the lower torque stages (values in counterclockwise rotation).
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
[1-1] Buttons for releasing the battery pack
[1-2] Bit store
[1-3] On/Off switch
[1-4] Right/left switch
[1-5] LED lamp
[1-6] Gear switch
Consider the pictures on the fold-out page.

Belt clip

The belt clip allows a shot-term securing of the de-
vice in the work clothes. Insert the belt clip on the
designated side, right or left, and fix it with the
screw [1a].

Changing the battery pack Fig. 2

 Battery pack is ready for use immediately upon
delivery and can be charged at any time.
The capacity display [1-10] automatically displays
the charge state of the battery pack [1-3] when the
ON/OFF switch is actuated:
10
Soft material (wood)
Hard material (metal)

Functional description

[1-7]
[1-8]
[1-9]
[1-10]
[1-11]
[1-12]
[1-13]

Commissioning

Removing the battery pack

Press and hold the button [2-1].

Slide the battery pack downwards to remove.
1st gear
2nd gear
1/16" - 1/2" (1.5 - 13 mm)
Wood 1-3/4" (45 mm)
Metal
2.4 lbs (1.1 kg)
Drilling symbol
Screwdriving symbol
Drilling/Fastening selector switch
Capacity display
Belt clip
Torque thumbwheel
Insulated gripping surfaces (grey shaded
area)
70 - 100 %
40 - 70 %
15 - 40 %
< 15 %
Recommendation: Charge bat-
tery pack before further use.
T 18+3 Li
35 Nm
50 Nm
0.8 - 8 Nm
0.5 - 6 Nm
5/8" (16 mm)
1/4"