Assembly And Set-Up - Razor DRIFT RIDER Owner's Manual

ASSEMBLY AND SET -UP
Attaching the Frame
Required Tools: Two (2) 5 mm Allen wrenches
1
Using the two (2) 5 mm Allen wrenches,
remove the two (2) coupling bolts at the end of
the frame.
3
Insert the rear frame into the wheel assembly.
Attaching the Handlebar Unit
Required Tool: 5 mm Allen wrench
1
Using the 5 mm Allen wrench, remove the
steering bolt from the handlebar unit.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
2
Remove and discard the plastic insert.
4
Securely tighten the two (2) coupling bolts
on the rear frame using the two (2) 5 mm
Allen wrenches.
2
Insert the frame and wheel assembly into the
handlebar unit.
4