Opening Lists With The Message Key; Handset Settings; Shortcuts For Functions And Numbers - Siemens Gigaset SL56 Owner's Manual

– Subscriber answers: press the Talk
key c. The function is ended.
– Subscriber does not answer: the call
is terminated after approx.
30 seconds. The function is ended
after pressing any key or ten unsuc-
cessful attempts.
Display Number (as in the directory,
page 11)
(as in the directory, page 11)
Delete Entry
(as in the directory, page 12)
Delete List
Opening lists with the message
key
An advisory tone sounds as soon as a new
entry appears on a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the displays shows
an icon for the new message.
If you press the f key, you access the
lists which contain new messages.

Handset settings

Your handset is preconfigured, but you
can change these settings to suit your
individual requirements.
Shortcuts for functions and
numbers
You can assign the left display key and
each of the digit keys Q and 2 to
O a number or a function.
The number is then dialled or the function
started by simply pressing a key.
Assigning a digit key/left display key
Preconditions: The digit key or the left
display key has not yet been assigned a
number or a function.
¤
Press the display key
and hold the digit key.
}
or press
The list of possible key assignments is
opened. The following can be selected:
Quick Dial / Call-by-Call
Assign key to a number from the direc-
tory or call-by-call list.
The directory or call-by-call list is
opened.
¤
Select an entry and press
If you delete or edit an entry in the
directory or call-by-call list, this has no
effect on the assignment to the digit/
display key.
Alarm Clock
Assign the key with the menu for set-
ting and activating the alarm clock
(page 21): ì
Alarm Clock
Calendar
Open calendar/enter new appoint-
ment.
Bluetooth
Assign the Bluetooth menu to a key:
¢ ¢
w ý
Bluetooth
Depending on your base station, further
key assignments are also possible.
If the left display key has been assigned a
shortcut, the selected function or name of
the phone number in the directory or call-
by-call list is displayed (abbreviated if nec-
essary) in the bottom display line.
Starting the function, dialling the
number
If the handset is in idle status, press and
hold the digit key or press the display key
briefly.
Depending on the key assignment:
u
Numbers are dialled directly.
u
The function menu is opened.
Changing key assignments
Display key
¤
Press and hold the left display key.
Handset settings
.
§OK§
.
.
15