Before Using; Charging Batteries - Cardo Systems allways Manual

Overview
i) 2 Velcro pads to attach the Adapter
to your mobile phone
* The Adapter's 2.5 mm jack works with
most mobile phones, but if your mobile
phone uses a different socket, you will
have to purchase the suitable mechanical
Audio Connector. Such Audio Connectors
can either be ordered directly from Cardo
Systems, Inc. or from appropriate retail
stores.
Volume Control
Charging
Socket
(here shown
withclosed
lid)
Speaker
Light Indicator
Front Panel/Control Button (CTRL)
10 †Headset Manual
Set/Mute button
Microphone
Holding Duct
Pointed tip to
exchange color
panel

4. Before Using

Read and familiarize yourself with all
instructions and components of your
allways Headset prior to use and in
™
particular before driving. Safety first!!!

4.1 Charging Batteries

Make sure the equipment (Headset and/or
Adapter) is fully charged prior to initial
use. Allow 4 hours for a full charge before
using for the first time. Thereafter, it will
require approximately 2-3 hours to
complete a full charge.
Charge the Headset (and if applicable the
Adapter unit) using the included charger
by plugging into a standard 110/220V-
wall socket. You must fully charge your
e q u i p m e n t p r i o r t o i n i t i a l u s e
(approximately 2.5 hours for a full charge).
The light indicator will remain red until
your allways Headset or Adapter is fully
™
charged; when fully charged, the light
indicator will turn to steady blue. You may
also leave the unit connected after
completion as there is no risk of damage
to the battery as a result of overcharging.
Note: For customers who have purchased
the Headset and the BT Adapter, the wall
charger will have a bifurcated cord to
supply simultaneous charge for both
devices.