Using The Handset As An Alarm Clock; Restoring The Handset Default; Settings - Siemens Gigaset C450IP Owner's Manual

Handset settings
Activating/deactivating advisory tones
¢
Audio Settings
§Menu§
Select and press
All advisory tones are activated or deacti-
vated.
Setting the battery low beep
¢
Audio Settings
§Menu§
/ /
On Off During Call
Select and press
The battery low beep is acti-
vated or deactivated or sounds
during a call.
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
¢
Alarm Clock
§Menu§
(‰ = on)
Or:
g
Press the alarm clock key.
After you activate the alarm clock, the
menu for setting the wake up time opens
automatically (page 44).
If the alarm clock is set, the wake up time
appears with the l icon in the display
instead of the date.
44
¢
Advisory Tones
(‰ = on).
§OK§
¢
Battery Low
(‰ = on).
§OK§
¢
Activation
Setting the wake up time
¢
Alarm Clock
§Menu§
~
Enter the wake up time in
hours and minutes, then press
.
§OK§
When the alarm clock rings...
Alarm repeat after 5 minutes
Press the display key or any
§Snooze§
key.
If you press three times the alarm
§Snooze§
clock switches off for 24 hours.
Switching off the alarm clock for 24 hours
Press the display key.
§Off§

Restoring the handset default

settings

Each individual handset setting is reset, in
particular the language, display, volume,
ringer and alarm clock settings (see from
page 42). The last number redial list is
cleared.
¢ ¢
Settings
§Menu§
¢
Reset Handset
Press the display key to con-
§OK§
firm.
a
Press and hold (idle status).
Cancel the reset with a.
¢
Wake up time
Handset