Siemens Gigaset C450IP Owner's Manual page 12

Siemens owner's manual telephone gigaset c450ip
Table of Contents

Advertisement

Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
The message
Select country
After changing the display:
q
Select country and press
Select provider
is displayed.
After changing the display:
q
Select VoIP provider and press
.
§OK§
The necessary data for your VoIP provider
is downloaded and saved on the phone.
Please note:
If the data for your VoIP provider is not offered
for download, you must make the necessary
settings with the Web configurator at a later
stage (page 57).
Press the display key §Back§. You can then con-
duct the following steps with the connection
assistant (see "Entering VoIP user data").
Entering VoIP user data
Depending on the VoIP provider, the
following information will be requested
in sequence:
Username:
If this is required by your pro-
vider, enter name and press
.
§OK§
Authentication Name:
Enter name and press
Authentication Password:
Enter password and press
Please note:
Please note when making these entries that
the VoIP user data is case sensitive. If neces-
sary, press and hold the
between upper and lower case and digits
is displayed.
.
§OK§
.
§OK§
.
§OK§
#
key to switch
Entering names in the Gigaset.net
directory
With Gigaset.net you can call other
Gigaset.net users directly over the Internet
free of charge, without setting up an
account with a VoIP provider and without
making any further settings. You can find
Gigaset.net subscribers by carrying out a
name search in the Gigaset.net directory
(page 24).
The following appears in the handset's dis-
play:
Start
Gigaset.net
assistant?
§§§§No§§§§
§§§§§Yes§§§§
Press the display key if you
§Yes§
want to enter yourself in the
Gigaset.net directory. If you
press
§No§
follows is described under
"Completing the VoIP set-
tings".
Own Gigaset.net name:
Enter the name that you
would like to be listed under in
the Gigaset directory and
press
§OK§
tain up to 25 characters.
A connection to the Gigaset.net server is
established.
If there is already an entry under this
name, you receive a message to this effect
and you will be asked to enter a name
again.
If an entry in the Gigaset.net directory is
successful, the message
Gigaset.net!" is displayed briefly.
If the attempt to create the entry fails (e.g.
because the phone is not connected to the
Internet), a message to this effect is displayed
briefly, see page 12. You can then create the
entry later via the Gigaset.net directory
(page 24).
First steps
, the procedure that
. The name may con-
"Name added to
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents