Activating/Deactivating The Display Of Charge/Call Time Of The Last Outgoing Call - Siemens A30853 Operating Instructions Manual

27.11.98
Programming the telephone settings
Activating/deactivating the display of charge/call time of the last outgoing
call
36
kap01.fm5
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
The charge and call time for the last outgoing call (if it is
activated) are displayed for approx. 10 seconds after the
handset has been lifted and replaced.
Enter 0 or 1 to deactivate or activate the display of charge:
"0" Display of charge /call time of the last outgoing
"1" Display of charge /call time of the last outgoing
In the as-supplied condition, the display of charge/call
time of th last outgoing call is activated.
a
Handset is on-hook.
S17
Start the programming procedure.
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
There may be differences between the device's
meter and the charge meter of the switching
centre. The charge meter of the network opera-
tor is definitive for the telephone bill.
Profiset 30isdn engl.: A30853-X300-B107-1-7619
call is deactivated
call is activated