Programming Keys On The Telephone; Programming The Destination Dialling Keys; Programming The Speed Dialling Keys - Siemens A30853 Operating Instructions Manual

27.11.98

Programming keys on the telephone

Programming the destination dialling keys

Programming the speed dialling keys

kap01.fm5
Programming keys on the telephone
Each Destination dialling key (at the top, left to the label-
ling card
used call number (up to 24 digits)
If a Destination dialling key has already been assigned,
the call number is displayed by pressing this key.
You can cancel a programming procedure without making
any changes by pressing the Disconnect key.
a
Handset is on-hook.
S10
Start the programming procedure.
T
Enter the password if necessary.
z
Press the Destination dialling key.
T
Enter the call number.
If you press the Number redial key, you can also program
the second Destination dialling key without having to exit
the programming procedure.
Press the Number redial key in order to be able to
W
program the second Destination dialling key with a call
number.
z
Press the second Destination dialling key.
T
Enter the call number.
S
Destination dialling numbers are stored.
You can use the labelling cards supplied to note
the names of the users next to the associated
keys, for example (
You can also program the digit keys 0 to 9 with frequently
used call numbers (up to 24 digits).
If a digit key has already been assigned with a speed dial-
ling number, the call number is displayed by pressing first
the speed dialling key and then the digit key.
Profiset 30isdn engl.: A30853-X300-B107-1-7619
page III) can be programmed with a frequently
page 41).
25