TRENDnet TL2-E284 Quick Installation Manual page 9

Hide thumbs Also See for TL2-E284:

5. Enter the following, click A p p ly and then

click OK,

Bits per second:

Data bits:

Parity:

Stop bits:

Flow control:

6. Press the Enter Key,

7. Enter the U ser Name for login, Then press the

Enter, Then Enter the Password and then

press Enter,

By default

Password: adm in

If you do not see the login prompt, please

power cycle the switch by unplugging the

power cord, wait 15 seconds and then plug it

back in,

3. U s in g T e lne t

The Telnet function may or may not be included with your computer's operating system, For

instructions on how to enable Telnet in W indows 7/Vista, please refer to the Troubleshooting

section,

1. Click the W indows / Start icon on the bottom

left hand corner and click A ll Program s,

None

Table of Contents