Configuration - Siemens SANTIS-ab User Manual

4. Configuration

•
There are only parameters for the a/b-interfaces. Thus there is
only a need for a configuration, if the a/b-interfaces are
available (NT+2ab mode and Pairgain mode; see chapter 2).
The configuration remains stored, even after a power failure.
•
The configuration is done by means of an analog telephone
set equipped with tone dialing, having both
Remark:
In normal use SANTIS-ab recognizes both pulse and tone
dialing.
•
If the NT+2ab mode is selected, all the configuration
commands can be set from both the a/b-interfaces without
any restrictions.
8
and keys.