Uninstalling Gigaset Pc Card 54; Uninstalling The Software; Completing Uninstall - Siemens GIGASET 54 User Manual

Siemens network card user manual

Hide thumbs Also See for GIGASET 54:

Table of Contents

Uninstalling Gigaset PC Card 54

You may have to uninstall the Gigaset PC Card 54:

If an error occurred during installation.

The Gigaset PC Card 54 is not working properly and the problem cannot be rectified

(see Chapter "Trouble shooting" on page 45).

You have acquired a newer version of Gigaset PC Card 54 and the operating instruc-

tions of the new device recommend uninstalling the older version.

You no longer need the Gigaset PC Card 54 and want to free up space on the hard

disk and working memory.

Uninstalling involves the following steps:

1. First uninstall the software for the Gigaset PC Card 54.

2. Then uninstall the hardware.

3. Complete uninstalling.

To uninstall the software for the Gigaset PC Card 54 from your PC:

Close all running programs.

Select Start – Programs – Gigaset PC Card 54 – Gigaset PC Card 54 Uninstall.

Confirm the security prompt for deinstallation with OK.

The software and all the drivers will now be removed from your PC.

Do not restart your PC until you have also removed the hardware.

Note:

If you restart the PC before removing the Gigaset PC Card 54, Windows will automat-

ically start its hardware recognition program. If this happens, close automatic hard-

ware recognition by clicking on Cancel.

Remove the Gigaset PC Card 54 from the PCMCIA slot on your PC.

Follow the remaining instructions and then restart your PC.

Table of Contents