Uninstalling The "Simatic Net Pc Software - Siemens SIMATIC NET CP 5614 A2 Operating Instructions Manual

Software installation

3.2 Uninstalling the "SIMATIC NET PC Software"

3.2 Uninstalling the "SIMATIC NET PC Software"
Condition
The "SIMATIC NET PC Software" is installed on the PG/PC.
Procedure
Note
The recommended procedure removes the entire "SIMATIC NET PC Software" on the
PG/PC, not only the driver for the communications processor.
Uninstall the entire software package as described and recommended in the installation
manual "SIMATIC NET PC Software".
You will find the installation manual on the "SIMATIC NET PC Software" DVD or on the
Product Support pages under the following entry ID:
77377602 (https://support.industry.siemens.com/cs/ww/en/view/77377602)
16
Operating Instructions, 08/2016, C79000-G8976-C301-02
CP 5613 A2/CP 5614 A2