Table of Contents
Advertisement
SpeedStream Wireless CardBus PC Card User's Manual
Configuring the SpeedStream Wireless PC Card
1. This screen shows you the status of your current connection. Click Re-Scan to
search for a wireless connection (the adapter will search for the connection
automatically when it is activated).
2. Select the "Configuration" tab. The profile setting allows you to save
configurations in different profiles for different working environments. The default
profile will contain the initial configuration setting when you install the Card. Under
the Operating Mode drop-box, you may choose either Infrastructure or Ad-Hoc.
The Infrastructure mode allows a wireless adapter to communicate with a wired
network
employing
wireless-to-wireless, peer-to-peer communication. If you choose Infrastructure, the
SSID should have the same name as the Access Point. If you choose Ad-Hoc, all
clients should share the same SSID name. You may also select which Transfer
Rate you wish to use: 1, 2, 5.5, 11Mbps or Auto Rate. Under Power Saving
Mode, you can select Enabled to allow your adapter to go to sleep mode while the
adapter doesn't detect any data transmission. Or select Disabled to make the
adapter never go to sleep mode. Click Apply to save the settings.
an
Access
Point,
while
the
Ad-Hoc
mode
allows
32
Advertisement
Table of Contents
