Connecting A Vcr; Connecting A Camcorder - Belkin USB VIDEOBUS P73261 User Manual

P73261/F5U206-MAC/US/man.qxd
Connecting a VCR or Camcorder to
After installing the USB VideoBus
connecting the VCR or camcorder to the USB VideoBus
following outlines the steps connecting the USB VideoBus
the VCR or camcorder:

1. Connecting a VCR

VCRs usually include either an S-video or RCA (depending on
your VCR) video cable with the same connector on both ends,
to allow connection of the VCR to a Television set. Please use
this cable to connect your VCR to the USB VideoBus
1. Connect the Yellow RCA or S-video connector on one end
of the audio/video cable to the "Video Out" connector on
the VCR. Connect the Yellow RCA or S-Video connector on
the other end of the Audio/Video cable to the appropriate
connector on the USB VideoBus
2. If you want to capture sound as well, connect the Red and
White RCA connectors on the included VideoBus
cable to the left and right "Audio Out" connectors of the
VCR. Connect the mini-stereo plug on the VideoBus
cable to the microphone jack on the iMac

2. Connecting a Camcorder

If your camcorder has RCA Video and Audio out connectors,
please refer to the instructions above for connecting a VCR.
1. Most camcorders use a custom cable for Video and Audio
output. Using the cable included with your camcorder,
connect either the S-Video or Yellow RCA connector to the
Yellow RCA connector on the Belkin USB VideoBus
1/7/00 5:23 PM
the USB VideoBus ™
, you can now start
™
™ .
™
4
Page 4
™ . The
™ to
™ .
audio
™
™ audio
, G3 or G4.
™ .