Belkin POWERLINE AV Quick Installation Manual

Knowing Your
Belkin Powerline
AV Networking Adapter
Power LED (Right)
Solid Blue – Connected to powerline
Off – Power off
Blinking Blue – During
encryption setup
Solid Blue – Encryption
setup successful
Double Flash – Fail in encryption
Powerline Link LED (Middle)
Blinking – Powerline data
transmitting or receiving
Color Blue – Link rate excellent:
greater then 20Mbps
Color Green – Link rate normal:
10–20Mbps
Color Amber – Link rate low:
0–10Mbps
Off – No activity
Ethernet Link LED (Left)
Solid Blue – 10/100Mbps port linked
Off – No Ethernet link

Quick Installation Guide

Installing and Setting Up the Adapter

Belkin Powerline AV Network Adapters allow you to extend your network over your home's existing wiring.
Max. 300m
1. Plug the Adapters into power outlets;
one in the room with your other network
equipment, and the other in a room
where you would like to have network
access. When the Adapters recognize
one another, their "Powerline Link" lights
will glow.
Note: Use the included extension cord for
extra distance, but do not plug the Adapter
into a power strip; doing so may degrade
network performance.
2. Connect one of the Adapters to your
existing modem or router with a network
cable. Use a second network cable to
connect the other Adapter to a computer
or other network device such as a printer
or wireless access point.