Pause; Hold; Fax Redial - Brother 1800C Owner's Manual

I
If the memory is full, press Stop/Exit to abort the job or if more than one page has
been scanned, press Black Fax Start to send the portion that is in the memory.
1
Place the original face down in the ADF.
2
Enter a number using One Touch, Speed Dial, a Group number, Search or the
dial pad.
Example: Group number
3
Press Menu/Set. You will be prompted to press the next number.
4
Enter the next number.
Example: Speed Dial
5
Press Menu/Set.
6
Enter the fax number.
Example: Manual dialing using the dial pad.
7
Press Black Fax Start.
Your fax machine will read the original into memory and then start sending
faxes to the numbers you entered.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.

Hold

1
Press Hook/Hold to place a call on Hold.
2
You can replace the handset without disconnecting the call.
3
Pick up the fax machine handset. (Picking up an extension handset will not
release the call from Hold.)

Fax Redial

If you're sending a fax manually and the line is busy, press Redial/Pause to
try again. Anytime you want to make a second call to the last number dialed,
press Redial/Pause to save time.
If you're sending a fax automatically and the line is busy, the fax machine will
redial automatically up to three times at 5 minute intervals.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
8 - 7