Table of Contents
Advertisement
6
Hold the new ink
cartridge as shown in
the illustration, and
then peel the sealing
tape from the side of
the ink cartridge.
Carefully peel the tape
in the direction away
from you.
To prevent spilling ink and staining your hands and clothing, remove the
Note
sealing tape gently.
7
Each color has its own correct position. Insert each new ink cartridge into the
carriage.
8
After installing the ink cartridges, close the top cover and control panel cover.
Your fax machine prepares for a "head cleaning" and goes online. The LCD
prompts you to verify a new ink cartridge was inserted for each color you
removed. Example:
If the ink cartridge you installed is not a brand new one, please make sure to
select 2.
9
For each new cartridge, press 1 on the dial pad to reset the ink dot counter for
that color automatically. (The ink dot counter enables the fax machine to notify
you when a color is running low.)
The fax machine will enter a cleaning cycle for approximately 3 minutes for
each replaced cartridge. The LCD alternately shows
PLEASE
WAIT.
When the fax machine completes the cleaning cycle, the LCD returns to Standby
mode (date and time).
WARNING
If ink gets in your eyes, irrigate them with water immediately and consult a
doctor if you are concerned.
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
DID YOU CHANGE BLCK? 1. YES 2.
Peel in the direction
away from you!
Opening
NO.
CLEANING
and
15 - 17
Advertisement
Table of Contents
