TRENDnet TV-IP325PI User Manual page 33

TRENDnet User's Guide
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the motion
detection. You can draw up to 8 different areas. Click
Stop Drawing to stop drawing motion detection
areas.
The red grids represent the motion detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
Arming Schedule
Edit: Click Edit to edit the recording schedule. The Edit
Schedule window will pop up.
1. Select day of the week you want to edit.
2. Select All Day or Customized schedule of the
day.
© Copyright 2018 TRENDnet. All Rights Reserved.
3. Set the time period and the event you want
to trigger the video recording continuous
(always recording) or motion detection.
4. Click Select All or the weekday you want to
have the same schedule on different day.
5. Click another day of the week by clicking on
its tab to set the next schedule. Click OK
when you have finished your settings.
Notification
Send Email: Check this box to send an e‐mail notification when
motion is detected.
Network Check this box to record video to network storage
Storage: when motion is detected.
Upload to FTP: Check this box to send snapshots to an FTP server
when motion is detected.
Click Save to save the changes
TV‐IP325PI
33