TRENDnet TV-IP325PI User Manual page 28

TRENDnet User's Guide
Switch Time: The time delayed to switch between
modes. Longer switch time can prevent unnecessary
mode flipping if an object is blocking the light source
temporarily. Range: 5‐120 seconds, default: 5
seconds.
Schedule:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Start Time: The start time for day mode.
Stop Time: The start time for day mode.
Smart Set the supplement light as ON, and Auto and Manual
Supplement
are selectable for light mode.
Light
Select Auto, and the supplement light changes
according to the actual luminance.
Mode Adjust the image settings manually or automatically.
If set to manual, the distance can be adjusted
BLC Area If you focus on an object against strong backlight, the
object will be too dark to be seen clearly. BLC
compensates light to the object in the front to make it
clear. OFF, Up, Down, Left, Right, Center, Auto, and
Custom are selectable.
WDR Wide Dynamic Range can be used when the object is
in front of a direct light.
© Copyright 2018 TRENDnet. All Rights Reserved.
White Balance:
Choose a color temperature as the white color and
compensate the color on the whole image.
Digital Noise Choose the mode of noise reduction.
Reduction:
Normal Mode
Noise Reduction Level: Adjust the effect of digital
noise reduction. Range: 0‐100%, default : 100%
Expert Mode
Space DNR Level: Adjust the special digital noise
reduction with adjacent pixels. Change the range (0‐
100%) to change the adjacency effect, default : 50%
Time DNR Level: Adjust the 3D digital noise reduction.
Compare and reduce noise between video frames.
Range: 0‐100%, default : 100%
Noise
Reduction Level Adjust the value of the noise reduction
Mirror Adjust the image to change from left to right or up and
down.
TV‐IP325PI
28