Demonstration - Samsung SCD5000 Owner's Instruction Manual

ENGLISH
Functions
G

DEMONSTRATION

✤ Demonstration automatically shows you the major functions that are included with your camcorder so that you may use
them more easily.
✤ The DEMONSTRATION function may only be used in the CAMCORDER mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the DEMONSTRATION mode is switched OFF.
1. Set the device to CAMCORDER and set the power switch to RECORD mode mode.
2. Press the MENU button.
I
The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and press the MENU DIAL.
5. To activate the DEMONSTRATION, set DEMONSTRATION to ON.
I
Press the menu button to quit the menu.
I
The demonstration will begin.
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Notes
I
The DEMONSTRATION function only works when there is no TAPE installed.
I
The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after
switching to CAMCORDER mode (when no tape is inserted in the camcorder).
I
If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.
44 44
CAMCORDER REC MODE
CLOCK SET
INITIAL
WL. REMOTE
CAMCORDER
CAMERA REC LAMP
MEMORY
BEEP SOUND
VIEWER
SHUT. SOUND
DEMO
CAMCORDER REC MODE
INITIAL SET
CLOCK SET SET TIME!
WL.REMOTE
RECORD LAMP
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION