Viewing The Demonstration (Demonstration) - Samsung VP-D392 User Manual

VIEWING THE DEMONSTRATION (DEMONSTRATION)

•
Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
•
The demonstration function may only be used in the Camera mode without a tape
inserted in the camcorder. ➥page 18
•
Before you begin: Make sure that there is no tape inserted in the camcorder.
➥page 34
•
The demonstration operates repeatedly until the demonstration mode is switched off.
1. Set the Select switch to TAPE. (VP-D395i only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
▲
4. Move the Joystick (
Joystick or move the Joystick ( )to the right.
▲
5. Move the Joystick (
the Joystick.
▲
6. Move the Joystick (
7. Press the MENU button.
•
The demonstration will begin.
8. To quit the demonstration, press the MENU button.
•
The demonstration function is automatically activated when the camcorder
is left idle for more than 10 minutes after switching to the Camera mode
(if no tape is inserted in the camcorder).
•
If you press other buttons (MENU, Joystick, EASY.Q...) during the
demonstration mode, the demonstration stops temporarily and resumes
10 minutes later if you do not operate any other functions.
•
The demonstration mode displays in 4:3 aspect ratio on the LCD screen.
All manuals and user guides at all-guides.com
).
▼ )
/ up or down to select "System", then press the
▼ )
/ up or down to select "Demonstration", then press
▼ )
/ up or down to select "On", then press the Joystick.
MODE
CARD TAPE
(VP-D395i only)
BATT .
Camera Mode
System System
Clock Set
On
Remote
On
Beep Sound
On
Shutter Sound
English
Language
On
Demonstration
Mov Move Sele lect Exi Exit
MENU
Camera Mode
System System
Clock Set
Remote
Beep Sound
Shutter Sound
Language Off
✔ On
Demonstration
Move Mov Sele lect Exit Exi
MENU
SAMSUNG Camcorder is...
34x Optical Zoom
1200x Digital Zoom
Multi-Visual Effect
Demonstration
English _29