Date/Time - Samsung SCD5000 Owner's Instruction Manual

Functions
G DATE/TIME
✤ The DATE/TIME function works in CAMCORDER or CAMERA mode and PLAYER, M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
I
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and press the MENU DIAL.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the MENU DIAL to select the sub-menu.
5. Using the MENU DIAL, select DATE/TIME mode.
I
You can choose to display - OFF, DATE, TIME, DATE/TIME
- OFF
- DATE only
- TIME only
- DATE & TIME
I
To return to the previous menu, highlight the DATE/TIME in the middle and press the MENU
DIAL.
6. To exit, press the MENU button.
Notes
I
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
I
The DATE/TIME will read "- - -" in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the lithium battery becomes weak or dead.
I
Before you can use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 37.
ENGLISH
CAMCORDER REC MODE
INITIAL
CAMCORDER
CAMERA
MEMORY
VIEWER LCD ADJUST

DATE/TIME

TV DISPLAY
CAMCORDER REC MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMCORDER REC MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE & TIME
45 45