Assembly
The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
1
Place the upper handle onto
the base and push it down.
Then attach the handle with
the 2 screws taped to the
handle in a plastic bag.
3
Insert the hose end into the back of the
vacuum and twist right to lock in place.
5
Now, put your accessory tools on the vacuum and you're ready to go!
Dusting Brush
NOTE: The Powerfoot will not suction properly unless the hose is firmly attached.
2
Insert the Extension Wand base and
turn it to the right to lock in place.
4
TurboEraser® Tool
Wrap hose up and
around the hose
wrap on the handle.
Slide end of hose
into vacuum base.
Extension Wand
(Crevice Tool stores inside)
www.BISSELL.com
5