Siemens MC60 User Manual page 66

Set up call divert (example):
The most common condition for call
divert is, for example:
Unanswered
Select Unanswered.
I
(Includes the conditions
Not reachable,
Busy, see below)
Press.
§Select§
Set Select.
Enter the phone number
to which the caller will be
J
diverted (If not already
entered)
Or
Select this phone number
·
from the Phonebook or
via §Mailbox§.
Confirm. After a short
§OK§
pause, the setting is
confirmed by the network.
All calls
All calls are diverted.
Symbol in the top line of
n
the display in standby
mode.
Not reachable
Divert occurs if phone is switched off
or is out of range.
b
No reply,
b
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
is activated (p. 64), you
Call waiting
will hear the call waiting tone during
a call.
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Status check
You can check the current divert
status for all conditions.
After a short pause, the current
situation is transmitted by the
network and displayed.
Condition set.
p
Not set.
o
Display if status is
s
unknown (e.g. with
a new SIM card).
Setup 65
b
b