Audio; Ringer Setting; Silent Alert - Siemens MC60 User Manual

62 Setup

Audio

¢ m ¢
§Menu§
¢
Select function.
You can set the tones to match your
needs.

Ringer setting

Activate/deactivate all
On/Off
tones.
Reduce ring tone to a
Beep
short signal (beep).
Additional information
Switch ringtone on/off.
*
Display: Beep.
k
Display: ringer off.
j

Silent alert

To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alternative.
The silent alert can also be activated
in addition to the ring tone (e.g. in
noisy environments). This function
is deactivated when the battery is
being charged.
The silent alert is activated if the
highest volume is set for the ring
tone. This is to remind you not to
hold the phone to your ear when ringing
in order to avoid damaging your
hearing.
Audio
Volume
Set different volumes for types of
call/functions.
Select:
I
Incoming calls
Alarm
Alarm clock
Messages
Cell broadcast
Start melody
End melody
Applications
Press. Der Klingelton wird
§Select§
wiedergegeben.
Set volume.
I
Confirm.
§OK§
Incoming calls
You can assign different volumes to
d Calls, Other calls
the Phonebook.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
If two independent phone numbers are
registered on your phone, you can set
different volumes for them (p. 73).
(see below)
and each group in